2025 Miller Industries 16 Series - LCG® Base

Information

2025 Miller Industries 16 Series - LCG®

Miller Industries has brought a whole new dimension to transport with the 16 Series LCG® (Low Center of Gravity) carrier. The patented design lowers the deck height 5" to 6" over conventional carriers. The lower height allows for the transport of taller loads such as forklifts or man-lifts that maybe over-height on a conventional carrier as well as providing better stability during transport.

The operator may easily secure loads or tied down vehicles standing on the ground with the lower height. When mounted on most air ride chassis, with the air dumped, the 16 Series LCG® has less than 11° load angle, making it ideal for loading low-clearance vehicles or equipment without using ramps or wood. Your new 16 Series LCG® is available in 20.5’ to 26’ with a capacity of 16,000 lb and a wide variety of options to fit your specific transport needs.

Features may include:

  • Platform Available in Aluminum or Steel
  • Floor Level Sides w/ Stake Pockets (Steel)
  • Right & Left Chain Trays
  • Painted in Black Acrylic Urethane (Steel Only)
  • Bed Anti-Tilt Lockout
  • Left & Right Side Illuminated Controls
  • Slide-In L-Arms w/ Anti-Theft Storage
  • Adjustable Rear Stabilizer
  • Two Lift Cylinders
  • 8,000 lb Hydraulic Winch w/ 50’ Cable
  • Cable Tensioner
  • Federal Standard #108 LED Lighting
  • Back-Up Lights & Alarm
  • Hydraulic Pump
  • Bed Built 102” Wide
  • Bi-Hollow Tube Rails (Aluminum)

Photos

Highlights

  • Greensburg, Indiana
  • 2025
  • Miller Industries
  • 16 Series - LCG® Base
  • Platform: 6”
  • Frame (Steel): 6 3/4” | Frame (Wood): 7 3/4”
  • Available
  • Platform (Outside): 102” | Platform (Inside): 96 1/2” – 101”
  • Frame Steel: 7 1/4” | Frame Wood: 8 1/4” | Frame Min: 36"| Frame max: 40"

Specifications

  • 2025
  • Miller Industries
  • 16 Series - LCG®
  • Base
  • Utility
  • Frame (Steel): 6 3/4” | Frame (Wood): 7 3/4”
  • Rails: 5” x 3” x 3/8” H.S. Tube
  • Size: 275/70R 22.5 | Lift Reach (Extended): 66" | Lift Rating (Extended): 4,000 lbs.
  • 275/70R 22.5
  • 275/70R 22.5
  • Platform Thickness: 3/16” | Cable: 3/8” x 50’ | Platform Crossmembers (Steel): 2 1/2” x 2 1/2” Cor-ten Tube, 8” on Center | Crossmembers (Aluminum): 3” Aluminum, 4” on Center | Spacing (Steel): 8” on Center | Spacing (Aluminum): 4” on Center
  • Platform: 20.5’, 21’, 21.5’, 22’, 23’, 24’, 25’, 26’ | Behind Center of Rear Axle: 36”
  • Frame Steel: 7 1/4” | Frame Wood: 8 1/4” | Frame Min: 36"| Frame max: 40"
  • Platform (Outside): 102” | Platform (Inside): 96 1/2” – 101”
  • Platform: 6”
  • Bed Tilt Cylinders: 3 1/2” Bore
  • Bed Extension Cylinder: 3 1/2” Bore x 120” Stroke
  • 1 Piece 1 1/2” Diameter
  • Rating: 10,000 lbs.
  • Load Rating: 16,000 lbs. | Winch (First Layer): 8,000 lb Worm
  • 26,000 lbs. – 33,000 lbs.